-
Vice President - Ground Transportation Applications, Exa Corporation
Dr. Alajbegovic first joined Exa in 1996. He rejoined the company in 2005 as the Director of Thermal Management Applications. He became Vice President of Ground Transportation Applications in 2013 after a continuous increase of responsibilities. He...
-
3D CFD & Combustion Engineer, Ford Otomotiv Sanayi
Anıl Can Ağar is working as a CFD Analyst at Engine Computer Aided Engineering Department of Ford Otomotiv Sanayi A.S. in Turkey. He has graduated from Heat transfer and Fluid Flow Masters Programme of Istanbul Technical ...
-
Aerodynamicist, Honda
Kenichi Ando, CFD engineer at Honda R&D Co., received his Masters of Science in Aerospace Engineering in 2004. That same year he started his career as an aerodynamicist focusing on wind tunnel testing at the company’s Automobile R&D...
-
Innovation Discipline Specialist - Acoustics & Vibration, Centro Ricerche FIAT
Innovation Discipline Specialist within the NVH department at Centro Ricerche Fiat (CRF), Giorgio Bartolozzi leads projects on numerical acoustics and noise and vibration simulations. His main focus is on lightweight design and optimization of...
-
Chief Race Engineer, Cyan Racing
Per Blomberg is Chief Race Engineer at Cyan Racing. That means responsible for all track activities regarding the engineering side of the racing operation. Cyan Racing is the motorsport partner of Polestar and Polestar is Volvo Cars performance cars...
-
Director of Business Development - Europe, Gamma Technologies
Giorgio Buccilli has 17 years of sales experience in CAE and Multi-Discipline Design Optimization Software and holds a Master in Aeronautical Engineering complemented by an MBA.
-
Student, Sapienza - University of Rome
Luca Candela is currently studying Aeronautical Engineering at "Sapienza - University of Rome". He graduated in Aerospace Engineering BSc in 2014 at "Sapienza - University of Rome". He is a propulsionist in the SASA Sapienza...
-
CAE Engineer, SACMI Imola S.C.
Riccardo Cenni received his Master’s Degree in Energetic Engineering at University of Bologna in 2012. After a one year internship in Alstom Power, he joined SACMI Imola S.C. where he is currently working as CAE Engineer at...
-
Research Engineer, Ford Werke GmbH
Xiao Chen is a research engineer of the Advanced Materials CAE team in Ford’s Research and Innovation Center in Aachen, Germany. Since joining Ford Motor Company in 2005, Xiao Chen has been working on various CAE projects. Currently he is...
-
PhD student, University of Trieste
Alessandro Cuttin holds a MEng degree in Communications Engineering, achieved at the University of Trieste, where he is currently attending the PhD program in Information Engineering. He is also co-founder of PicoSaTs...
-
R&D Engineer, EnginSoft SpA
Silvia Demattè has an MSc in Building Engineering from Politecnico of Milan with a thesis on energy performance (measurements and calculations). She works in the R&D Department of EnginSoft, an Italian-based multinational ...
-
Product Manager modeFRONTIER, ESTECO SpA
Danilo Di Stefano graduated in Physical Chemistry from the University of Padova, and completed a Master's programme in Bioinformatics at the University of Bologna. After three years of experience as a Scientist at the Area Science Park (national...
-
CAE Engineer, Vehicle Dynamics, ÅF Industry/Automotive Projects
Oskar received his masters degree in Automotive Engineering from Chalmers University of Technology in 2014. Since then he has been working as a consultant CAE Engineer, analysing vehicle dynamics in several development projects using multibody...
-
Manager of Global Powertrain NVH & Systems CAE, Ford Motor Company
Mr. Felice is Manager of the Global Powertrain NVH CAE engineering Dept. at Ford Motor Company. He heads a large team of CAE engineers located in North America, Europe, Australia and South America. Mr. Felice is responsible for all the analytical...
-
Researcher, Università La Sapienza
Stefania Gemma graduated with honors in Aeronautical Engineering in 2011 at University of Rome “La Sapienza” (Italy). On April 2015, she awarded her PhD in Aeronautical and Space Technologies at the department of...
-
Senior advanced engineering leader - virtual optimization, Volvo Car Corporation
Alexander Govik received his Ph.D. degree in solid mechanics at Linköping University in 2014. Today he works as a specialist at Volvo Car Corporation, at the body and closures department. He is responsible for developing optimization methods...
-
Head of Aerodynamics, Israel Aerospace Industries (IAI)
Mr Ohad Gur received is PhD in in Aerospace engineering in 2007 at Technion - Israel Institute of Technology (IIT). From 1996 to 2001 he was Captain at Israel Air Force (IAF), Flight Science Branch, Performance Group....
-
Chief Researcher, Tubitak Sage
Ali Karacoç is Defence Systems Engineer in TUBITAK SAGE since 2007. Before joining Tubitak company, Ali Karacoç has been working as Automotive Engineer in OTAM. Ali Karacoç received...
-
Head of Research and Development, ESTECO SpA
Carlos obtained his PhD in Computer Science in Optimization at the University of Paris Sud (France). He has been co-Director of international workshops at the International Center for Theoretical Physics ICTP (Italy) since 1993 till 2012 and...
-
Customer Services, Senior Supervisor, BETA CAE Systems S.A.
George Korbetis received his degree in Mechanical Engineer from the Aristotle University of Thessaloniki. After working for several years in Machine Design field, Korbetis joined BETA CAE Systems S.A. Customers Service department in 2001 and he is...
-
Head of multidisciplinary laboratory, Space-SI
Martin Lamut joined Space-SI in 2011 as a member of WP6 Development of multidisciplinary laboratory for on-ground testing of space technologies. In 2012 he was appointed Head of Multidisciplinary laboratory at Space-SI. His ...
-
Expert Advisor, Tetra Pak Packaging Solutions S.p.A.
Dott. Ing. Carlo Leardi graduated 1989 in electronic engineering in Genova Italy. His professional background starts with quality assurance responsibility evolving in the last years to full verification, validation and testing commitment within...
-
Simulation Team Leader, Land Rover BAR
Matteo was born in 1979 in Udine, Italy. He studied Naval Architecture & Marine Engineering at the University of Trieste from which he graduated in 2004. From 2004 to 2010 he worked for ESTECO in Trieste, where he was involved in CFD analysis...
-
Student, Ben-Gurion University
Bar Nurel is a forth year Student of mechanical engineering bachelor's degree in Ben-Gurion University of the Negev. Employed as a research assistant in Shock Tube Laboratory, my research deals with the behavior of shock waves in...
-
Research Assistant, FESB
Ivo Marinić-Kragić is currently working on his Ph.D in Mechanical Engineering at Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, Croatia. To date he has published three scientific papers on...
-
PhD student, Università del Salento, Esteco SpA
Teresa Montrone is a phd student in Mathematics at University of Salento, Lecce. She has also been working at ESTECO SpA since 2013, belonging to the Numerical Method Group.
-
Head of Research & Scientific Coordination, illycaffè
Luciano Navarini is the Head of Research & Scientific Coordination at illycaffè S.p.A. a leading Italian coffee roasting company. He graduated in Chemistry at the University of Trieste (Italy) and he collaborated with several...
-
Enterprise Solutions Product Manager, ESTECO
Matteo is the Enterprise Solutions Product Manager at ESTECO. In this role is in charge of client engagement management, requirements gathering and roadmap building. Responsible for analyzing market conditions and defining features or functions of...
-
Chief technology Officer, ESTECO SpA
Luka Onesti graduated in Electronics Engineering at the University of Trieste and subsequently was visiting researcher at the University of Bergen (Norway). He was involved in the European founded project Frontier and has been one of the original...
-
Research Fellow, Politecnico di Bari
Antonio Piccininni was born in Bari, Italy, on 23 November 1982. He received the Master’s Degree in Mechanical Engineering from the Politecnico di Bari (Bari, Italy) in 2012 discussing the thesis “Numerical Investigation of the shifting...
-
Technical Director, PLUS
Mauro Poian received the B.S. in Electrical Engineering in 1999 from University of Trieste. Mauro Poian worked for ESTECO for 10 years as support engineer. In 2011 he founded PLUS Solutions s.r.l..
-
President, ESTECO SpA
Carlo Poloni received a degree in Mechanical Engineering in 1987, the same course that he now teaches at the University of Trieste, Italy. His working experience includes working at the space division of Aeritalia (Italian aerospace company) and...
-
Vice President of Research, CIMdata
Stan Przybylinski has over 30 years of experience in the development of business-enabling IT solutions for research, engineering, and manufacturing organizations worldwide. He has worked in R&D, marketing, and communications with both Fortune...
-
Senior Researcher, University of Bologna
Dr. Barbara Reggiani is senior researcher at the Industrial Department of the Bologna University (Italy) since 2008. She is contract professor of "Non-conventional machining" at the University of Bologna for the Mechanical degree. She...
-
Industry analyst, Schnitger Corporation
Monica Schnitger is an industry analyst who is passionate about engineering IT: CAD/CAM, CAE, PLM and the other technologies used to create the world around us. Properly applied, they can create significant business advantage. Monica has developed...
-
Researcher, Kolektor Turboinstitut
Aljaž Skerlavaj has been working as a researcher at Kolektor Turboinstitut since 2007, specializing in CFD simulations of hydraulic machines. He is currently performing secondment at University of Trieste within the...
-
Technical Manager, EnginSoft France
Technical Manager at EnginSoft France, Romain Soulier coordinates a team of mechanical engineers. His main focus is on thermal hydraulics simulation in the field of Energy.
He received his Master’s Degree in Mechanics at the ENSIAME...
-
Technical Manager, IDAJ
After receiving his master degree at the department of engineering from Fukui University in 2001, Mr Takeshima has been engaged in CAE activities in heavy industry company and appliance company. He joined IDAJ in 2005 and he is currently technical...
-
Director, Structural & Dynamic Analysis, Cummins
With more than 25 years’ experience in the design and development of IC engines and 15 years’ in analysis-led design tools and methods, Bob Tickel has been at Cummins since 1988. He received his Master’s degree in Engineering at...
-
Managing Director, EnginSoft GmbH
Conrad Toepfer received his Mechanical Engineering degree from the Technical University of Braunschweig (Germany), specializing in Design Methodology. During his long-term career, he worked as
Design Project Leader Electrical...
-
Technical Expert MDO, Volvo Car Corporation
Dr. M. Törmänen finished his Ph.D. in Vehicle Engineering in 2001 at the department of Machine and Vehicle Systems at Chalmers University of Technology. He has joined Volvo Car Corporation in 2005 to work with powertrain simulations...
-
Project Manager, ESTECO SpA
Alessandro Turco got his PhD in Applied Math at SISSA in Trieste in 2008 and then joined ESTECO as a researcher for the Numerical Methods Group. Since 2013 he is responsible for the research project involving BPMN standard, which is now becoming a...
-
Racing Engine Development Manager, Aprilia Racing
-
Designer, Groupama Team France
Born in Venice in 1983, Andrea holds a degree in Aerospace Engineering from the University of Padova and is specialized in computational fluid dynamics (CFD) analysis and VPP studies applied to sailing yachts. Andrea gained ...
-
Senior Research & Application Engineer, ESTECO North America
Dr. Zhendan Xue is currently working as Senior Research and Application Engineer for ESTECO from Novi MI office. He has been with ESTECO for over 6 years supporting ESTCO customers for their engineering optimization activities.
He graduated in 2009...
-
CAE Manager, Jaguar Land Rover
Dr Tayeb Zeguer hold a first honour degree in mechanical Engineering, a master degree in computer aided design and a doctor ( PhD) in optimisation and robustness. Tayeb joined Jaguar in 1984 in power train department. He worked as CAE...
Vice President - Ground Transportation Applications, Exa CorporationDr. Alajbegovic first joined Exa in 1996. He rejoined the company in 2005 as the Director of Thermal Management Applications. He became Vice President of Ground Transportation Applications in 2013 after a continuous increase of responsibilities. He...
3D CFD & Combustion Engineer, Ford Otomotiv SanayiAnıl Can Ağar is working as a CFD Analyst at Engine Computer Aided Engineering Department of Ford Otomotiv Sanayi A.S. in Turkey. He has graduated from Heat transfer and Fluid Flow Masters Programme of Istanbul Technical ...
Aerodynamicist, HondaKenichi Ando, CFD engineer at Honda R&D Co., received his Masters of Science in Aerospace Engineering in 2004. That same year he started his career as an aerodynamicist focusing on wind tunnel testing at the company’s Automobile R&D...
Innovation Discipline Specialist - Acoustics & Vibration, Centro Ricerche FIATInnovation Discipline Specialist within the NVH department at Centro Ricerche Fiat (CRF), Giorgio Bartolozzi leads projects on numerical acoustics and noise and vibration simulations. His main focus is on lightweight design and optimization of...
Chief Race Engineer, Cyan RacingPer Blomberg is Chief Race Engineer at Cyan Racing. That means responsible for all track activities regarding the engineering side of the racing operation. Cyan Racing is the motorsport partner of Polestar and Polestar is Volvo Cars performance cars...
Director of Business Development - Europe, Gamma TechnologiesGiorgio Buccilli has 17 years of sales experience in CAE and Multi-Discipline Design Optimization Software and holds a Master in Aeronautical Engineering complemented by an MBA.
Student, Sapienza - University of RomeLuca Candela is currently studying Aeronautical Engineering at "Sapienza - University of Rome". He graduated in Aerospace Engineering BSc in 2014 at "Sapienza - University of Rome". He is a propulsionist in the SASA Sapienza...
CAE Engineer, SACMI Imola S.C.Riccardo Cenni received his Master’s Degree in Energetic Engineering at University of Bologna in 2012. After a one year internship in Alstom Power, he joined SACMI Imola S.C. where he is currently working as CAE Engineer at...
Research Engineer, Ford Werke GmbHXiao Chen is a research engineer of the Advanced Materials CAE team in Ford’s Research and Innovation Center in Aachen, Germany. Since joining Ford Motor Company in 2005, Xiao Chen has been working on various CAE projects. Currently he is...
PhD student, University of TriesteAlessandro Cuttin holds a MEng degree in Communications Engineering, achieved at the University of Trieste, where he is currently attending the PhD program in Information Engineering. He is also co-founder of PicoSaTs...
R&D Engineer, EnginSoft SpASilvia Demattè has an MSc in Building Engineering from Politecnico of Milan with a thesis on energy performance (measurements and calculations). She works in the R&D Department of EnginSoft, an Italian-based multinational ...
Product Manager modeFRONTIER, ESTECO SpADanilo Di Stefano graduated in Physical Chemistry from the University of Padova, and completed a Master's programme in Bioinformatics at the University of Bologna. After three years of experience as a Scientist at the Area Science Park (national...
CAE Engineer, Vehicle Dynamics, ÅF Industry/Automotive ProjectsOskar received his masters degree in Automotive Engineering from Chalmers University of Technology in 2014. Since then he has been working as a consultant CAE Engineer, analysing vehicle dynamics in several development projects using multibody...
Manager of Global Powertrain NVH & Systems CAE, Ford Motor CompanyMr. Felice is Manager of the Global Powertrain NVH CAE engineering Dept. at Ford Motor Company. He heads a large team of CAE engineers located in North America, Europe, Australia and South America. Mr. Felice is responsible for all the analytical...
Researcher, Università La SapienzaStefania Gemma graduated with honors in Aeronautical Engineering in 2011 at University of Rome “La Sapienza” (Italy). On April 2015, she awarded her PhD in Aeronautical and Space Technologies at the department of...
Senior advanced engineering leader - virtual optimization, Volvo Car CorporationAlexander Govik received his Ph.D. degree in solid mechanics at Linköping University in 2014. Today he works as a specialist at Volvo Car Corporation, at the body and closures department. He is responsible for developing optimization methods...
Head of Aerodynamics, Israel Aerospace Industries (IAI)Mr Ohad Gur received is PhD in in Aerospace engineering in 2007 at Technion - Israel Institute of Technology (IIT). From 1996 to 2001 he was Captain at Israel Air Force (IAF), Flight Science Branch, Performance Group....
Chief Researcher, Tubitak SageAli Karacoç is Defence Systems Engineer in TUBITAK SAGE since 2007. Before joining Tubitak company, Ali Karacoç has been working as Automotive Engineer in OTAM. Ali Karacoç received...
Head of Research and Development, ESTECO SpACarlos obtained his PhD in Computer Science in Optimization at the University of Paris Sud (France). He has been co-Director of international workshops at the International Center for Theoretical Physics ICTP (Italy) since 1993 till 2012 and...
Customer Services, Senior Supervisor, BETA CAE Systems S.A.George Korbetis received his degree in Mechanical Engineer from the Aristotle University of Thessaloniki. After working for several years in Machine Design field, Korbetis joined BETA CAE Systems S.A. Customers Service department in 2001 and he is...
Head of multidisciplinary laboratory, Space-SIMartin Lamut joined Space-SI in 2011 as a member of WP6 Development of multidisciplinary laboratory for on-ground testing of space technologies. In 2012 he was appointed Head of Multidisciplinary laboratory at Space-SI. His ...
Expert Advisor, Tetra Pak Packaging Solutions S.p.A.Dott. Ing. Carlo Leardi graduated 1989 in electronic engineering in Genova Italy. His professional background starts with quality assurance responsibility evolving in the last years to full verification, validation and testing commitment within...
Simulation Team Leader, Land Rover BARMatteo was born in 1979 in Udine, Italy. He studied Naval Architecture & Marine Engineering at the University of Trieste from which he graduated in 2004. From 2004 to 2010 he worked for ESTECO in Trieste, where he was involved in CFD analysis...
Student, Ben-Gurion UniversityBar Nurel is a forth year Student of mechanical engineering bachelor's degree in Ben-Gurion University of the Negev. Employed as a research assistant in Shock Tube Laboratory, my research deals with the behavior of shock waves in...
Research Assistant, FESBIvo Marinić-Kragić is currently working on his Ph.D in Mechanical Engineering at Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, Croatia. To date he has published three scientific papers on...
PhD student, Università del Salento, Esteco SpATeresa Montrone is a phd student in Mathematics at University of Salento, Lecce. She has also been working at ESTECO SpA since 2013, belonging to the Numerical Method Group.
Head of Research & Scientific Coordination, illycaffèLuciano Navarini is the Head of Research & Scientific Coordination at illycaffè S.p.A. a leading Italian coffee roasting company. He graduated in Chemistry at the University of Trieste (Italy) and he collaborated with several...
Enterprise Solutions Product Manager, ESTECOMatteo is the Enterprise Solutions Product Manager at ESTECO. In this role is in charge of client engagement management, requirements gathering and roadmap building. Responsible for analyzing market conditions and defining features or functions of...
Chief technology Officer, ESTECO SpALuka Onesti graduated in Electronics Engineering at the University of Trieste and subsequently was visiting researcher at the University of Bergen (Norway). He was involved in the European founded project Frontier and has been one of the original...
Research Fellow, Politecnico di BariAntonio Piccininni was born in Bari, Italy, on 23 November 1982. He received the Master’s Degree in Mechanical Engineering from the Politecnico di Bari (Bari, Italy) in 2012 discussing the thesis “Numerical Investigation of the shifting...
Technical Director, PLUSMauro Poian received the B.S. in Electrical Engineering in 1999 from University of Trieste. Mauro Poian worked for ESTECO for 10 years as support engineer. In 2011 he founded PLUS Solutions s.r.l..
President, ESTECO SpACarlo Poloni received a degree in Mechanical Engineering in 1987, the same course that he now teaches at the University of Trieste, Italy. His working experience includes working at the space division of Aeritalia (Italian aerospace company) and...
Vice President of Research, CIMdataStan Przybylinski has over 30 years of experience in the development of business-enabling IT solutions for research, engineering, and manufacturing organizations worldwide. He has worked in R&D, marketing, and communications with both Fortune...
Senior Researcher, University of BolognaDr. Barbara Reggiani is senior researcher at the Industrial Department of the Bologna University (Italy) since 2008. She is contract professor of "Non-conventional machining" at the University of Bologna for the Mechanical degree. She...
Industry analyst, Schnitger CorporationMonica Schnitger is an industry analyst who is passionate about engineering IT: CAD/CAM, CAE, PLM and the other technologies used to create the world around us. Properly applied, they can create significant business advantage. Monica has developed...
Researcher, Kolektor TurboinstitutAljaž Skerlavaj has been working as a researcher at Kolektor Turboinstitut since 2007, specializing in CFD simulations of hydraulic machines. He is currently performing secondment at University of Trieste within the...
Technical Manager, EnginSoft FranceTechnical Manager at EnginSoft France, Romain Soulier coordinates a team of mechanical engineers. His main focus is on thermal hydraulics simulation in the field of Energy. He received his Master’s Degree in Mechanics at the ENSIAME...
Technical Manager, IDAJAfter receiving his master degree at the department of engineering from Fukui University in 2001, Mr Takeshima has been engaged in CAE activities in heavy industry company and appliance company. He joined IDAJ in 2005 and he is currently technical...
Director, Structural & Dynamic Analysis, CumminsWith more than 25 years’ experience in the design and development of IC engines and 15 years’ in analysis-led design tools and methods, Bob Tickel has been at Cummins since 1988. He received his Master’s degree in Engineering at...
Managing Director, EnginSoft GmbHConrad Toepfer received his Mechanical Engineering degree from the Technical University of Braunschweig (Germany), specializing in Design Methodology. During his long-term career, he worked as Design Project Leader Electrical...
Technical Expert MDO, Volvo Car CorporationDr. M. Törmänen finished his Ph.D. in Vehicle Engineering in 2001 at the department of Machine and Vehicle Systems at Chalmers University of Technology. He has joined Volvo Car Corporation in 2005 to work with powertrain simulations...
Project Manager, ESTECO SpAAlessandro Turco got his PhD in Applied Math at SISSA in Trieste in 2008 and then joined ESTECO as a researcher for the Numerical Methods Group. Since 2013 he is responsible for the research project involving BPMN standard, which is now becoming a...
Racing Engine Development Manager, Aprilia Racing
Designer, Groupama Team FranceBorn in Venice in 1983, Andrea holds a degree in Aerospace Engineering from the University of Padova and is specialized in computational fluid dynamics (CFD) analysis and VPP studies applied to sailing yachts. Andrea gained ...
Senior Research & Application Engineer, ESTECO North AmericaDr. Zhendan Xue is currently working as Senior Research and Application Engineer for ESTECO from Novi MI office. He has been with ESTECO for over 6 years supporting ESTCO customers for their engineering optimization activities. He graduated in 2009...
CAE Manager, Jaguar Land RoverDr Tayeb Zeguer hold a first honour degree in mechanical Engineering, a master degree in computer aided design and a doctor ( PhD) in optimisation and robustness. Tayeb joined Jaguar in 1984 in power train department. He worked as CAE...